TKC-LB系列開環型霍爾電流傳感器的初、次級之間是絕緣的，用于控制、測量直流、交流和脈沖電流。

　　TKC-LB series current sensor is a open loop device based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC, AC or pulsed currents.

　　電參數 Electrical data(Ta=25℃±5℃,RL=10KΩ,CL=10000PF)

　　應用 Applications

　　● 變頻調速系統

　　Variable speed drives

　　● 電焊機

　　Welding machine

　　● 通訊電源

　　Battery supplied applications

　　● 不間斷電源UPS

　　Uninterruptible Power Supplies (UPS)

　　● 電化學

　　Electrochemical

　　結構參數 Mechanical dimension(for reference only)

　　Remarks：

　　1. All dimensions are in mm.

　　2. General tolerance ±1mm

　　使用說明 Directions for use

　　1. 產品箭頭的方向為Ip方向。

　　It will be in a forward direction when the Ip flows according to the direction of the arrowhead.

　　2. 初級導體溫度不應超過120℃。

　　The primary conductor should be≤120℃.

　　3. 母排完全充滿初級穿孔時動態表現(di/dt和響應時間)為最佳。

　　The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.

　　4. 當待測電流從傳感器穿過，即可在輸出端測得電壓大小。(注意：錯誤的接線可能導致傳感器損壞)

　　When the current will be measured goes through a sensor, the voltage will be measured at the output end.

　　(Note: The false wiring may result in the damage of the sensor)

　　5. 傳感器的輸出幅度可根據用戶需要進行適當調節。

　　Customs can adjust Output amplitude of the sensor by needs.

　　6. 可按用戶需求定制不同額定輸入電流和輸出電壓的傳感器。

　　Custom design in the different rated input current and the output voltage are available.

　　執行標準 Standards

　　● UL94-V0.

　　● EN60947-1:2004

　　● IEC60950-1:2001

　　● EN50178:1998

　　● SJ 20790-2000

　　總體參數 General date

　　特性圖 Characteristics chart